![]() Lwfinger on github has a bluetooth driver for the RTL8723BU (USB ID 0bda:b720) I found this guide on compiling the driver: I found that i could not get the on-screen keyboard to work for logging into the cube.īT is part of the same chip AFAIK. ![]() Install "onboard" for an onscreen keyboard (sudo apt-get install onboard) Then "modprobe 8723bu" to load the driver and your wifi should come up.Īs soon as you have WiFi running, update all your software (sudo apt-get update& sudo apt-get upgrade)Sound card:The sound card is an Intel PCH (Realtek ACL283 chip) Run a "depmod -a" to refresh the module list Make it root owned (sudo chown root:root 8723bu.ko) To compile this you will need Git and build-essential from the repo (sudo apt-get install git build-essential)Ĭopy the compiled 8723bu.ko file to the Cube and put it in /lib/modules/3.19.0-15-generic/kernel/drivers/net/wireless ![]() Use driver for the RTL8723BU from lwfinger on Github ()and () compile it on a pc that has the same kernel as the lubuntu you are installing. Hub that does not comply with USB spec may also work as it reports less current than it draws "echo -n 1 /sys/bus/usb/devices//bConfigurationValue" or Use "Startup Disk Creator" to make your USB stick bootable and load your ubuntu ISO (i use Lubuntu).Ĭube USB seems to fail config on bus powered device if your USB key and keyboard draws over 200mA, to resolve this: You will need a USB keyboard, a USB hub and a spare USB stick 4GB or more formatted to FAT 32. Cube refers to Lubuntu 15.04 as installed from a 圆4 live desktop iso with 3.19.0-15 kernel. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |